top of page


An advanced microwave interferometry based system for remote static and dynamic monitoring, IBIS-FS Plus inferometric radar is used on bridges and other structures including buildings, historical monuments and towers. An accelerometer version of IBIS-FS, this radar mitigates the effect of large external vibration sources on results.

In static, the IBIS-FS Plus is ideal for:

  • Structure load testing;

  • Structure displacement and collapse hazards;

  • Cultural heritage preservation.

In dynamic, the IBIS-FS Plus is best used for:

  • Structure resonance frequency measurements;

  • Structural modal shape analysis.

In either state, the IBIS-FS Plus features:

  • Remote sensing: Real-time remote sensing at up to 1 km with no need for equipment to be installed on the monitored structure.

  • Accurate measurements: Measures displacements of as little as 0.01mm @ 0.5km range. No standard instrument can achieve such accuracy.

  • Ground vibration removal: Built-in accelerometer to cancel the self-induced vibrations transmitted to the radar from the ground.

  • Sampling: Structural vibration sampling up to 200 Hz.

  • Always operational: Operates day and night and in all weather conditions.

 Benefits of the IBIS-FS Plus include:

  • Accurate measurements even when the system is installed in places with large ground vibrations;

  • Increase structural health monitoring efficiency through the use of a non-invasive vibration monitoring technique;

  • Accurate and remote real-time monitoring of structural vibration and natural frequencies;

  • Reduces the time required for static or dynamic bridge structural testing to just a few minutes


bottom of page